Eaton Powerware BladeUPS Bedienungsanleitung PDF herunterladen (Seite 10)

Technical Specifications

General Characteristics

Power Rating 12 kW per UPS Module

Efficiency >97%

Heat Dissipation 371W/1266 BTU/hr at 100% rated load

Cooling Fan cooled, temperature microprocessor

monitored; front air entry, rear exhaust

Audible Noise, 50 dBA at 1 meter

Normal Operation

Altitude Before 1000 meters (3300 ft ASL)

Derating

Input Characteristics

Input Voltage 208 Vac and 400 Vac models

Voltage Range 208V model: 180 to 265 Vac

400V model: 311 to 519 Vac

Frequency Range 50 or 60 Hz, ±5 Hz

Input Current <5% with IT loads (PFC power supplies)

Distortion

Input Power Factor >0.99 with IT loads (PFC power supplies)

Inrush Current Load dependent

Input Requirements 3-phase, 4-wire + ground

Bypass Source Same as input (single feed)

Generator Fast sync slew rate for generator synchronization

Compatibility

Output Characteristics

Rated Output 208V model: 180 to 255 Vac, Ph to Ph

Voltage 400V model: 180 to 240 Vac, Ph to N

Output 3-phase, 4-wire + ground

Configuration

Output Frequency 50 or 60 Hz auto-detection on startup

(nominal)

Frequency 0.1 Hz free running

Regulation

Load Power Lagging: 0.7

Factor Range Leading: 0.9

Total Output <3% (linear load)

Voltage Distortion <5% (non-linear load)

Battery Characteristics

Battery Type VRLA - AGM

Battery Runtime 13 minutes at 50% load

(Internal) 4.8 minutes at 100% load

Battery String 240 Vdc

Voltage

Battery Test Automatic battery test standard

(remote scheduling capable)

Manual battery test from front display

Battery Recharge Advanced Battery Management 3-stage

Profile charging technology

Battery Cut-off Variable from 1.67 VPC at <5 min. runtime to

Voltage 1.75 VPC at >90 min. runtime

Battery Low Announced with alarm

Condition

Extended Battery Yes, add up to 4 additional 3U battery enclosures

Capability (~34 min at 100% load, >1 hour at 50% load)

Physical Characteristics

Dimensions (HxWxD)

UPS 10.3 (6U) x 17.4 x 26.0 inches

267 x 442 x 660 mm

EBM 5.2 (3U) x 17.2 x 26 inches

132 x 437 x 660 mm

Note:

Total Chassis Weight 100 lb. (46 kg)

without batteries or

electronics

Total Chassis Weight 307 lb. (140 kg)

with batteries or

electronics

Total UPS Weight 135 lb (61 kg)

without Batteries

Total UPS Weight 307 lb (140 kg)

with Batteries

EBM Weight 170 lb (77 kg)

Communications and User Interface

Software UPS ships with Software Suite CD containing

Compatibility Powerware LanSafe power management software and a trial

version of PowerVision

X-Slot

Bays Two available for the cards listed below

Optional X-Slot Communication Cards

Application Powerware Card

Web – TCP/IP ConnectUPS

™

-X Web/SNMP Card

Modbus

RTU Modbus Card

IBM eServer

™

Relay Interface Card

(i5

™

, iSeries

™

or AS/400

)

N/O, N/C Industrial Relay Card

(dry contacts)

Parallel Powerware Hot Sync CAN Bridge Card

Remote Monitoring Modem Card

Control Panel LCD 2 lines by 20 characters

4 menu-driven interface buttons

4 status at a glance LEDs

Multi-language English standard; 20 languages available

Configuration User capable, firmware auto configures

Changes

Dry Contact Inputs One, user-configurable

Dry Contact Outputs One, user-configurable

Service

Installation User capable, located in the IT racks

Preventative User capable, optional factory service available

Maintenance

Corrective User capable, optional factory service available

Maintenance

Serviceability Hot-swappable batteries

Features Hot-swappable electronics module

Automated internal maintenance bypass

Auto-configure firmware

Flash firmware upgradeable

Certifications

Safety 208V model: UL1778, cUL

400V model: CE

EMI 208V model: FCC Part 15 Class A

400V model: EN 62040-2 Class A

Surge Protection ANSI C62.41, Cat A & B

Hazardous EU Directive 2002/95/EC Category 3 (4 of 5)

Materials (RoHS)

Warranty

Standard 12 months

Warranty Repair Factory depot repair or replace

Service Support Agreements

Depot PowerTrust

™

Express

On-site 5x8 PowerTrust Value

On-site 7x24 PowerTrust 8-, 6- or 2-hour response

Options and Accessories

Detachable input cord

Detachable input/output cord assembly

Detachable paralleling cord assembly

Extended Battery Modules (EBMs)

3U output sub-distribution module

0U to 3U rack power strips

60 kW Powerware BladeUPS Parallel Bar

4-post rail kit

Environmental Monitoring Probe (EMP) for temperature and humidity monitoring

X-Slot Communication Cards (see Communications and User Interface section)

1. Due to continuing product improvement programs, specifications are subject to change without notice.

2. eNotify remote monitoring and 7x24 technical support included.

1 2 ... 5 6 7 8 9 10 11

Kommentare zu diesen Handbüchern

Keine Kommentare

Eaton Powerware BladeUPS Bedienungsanleitung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Unterbrechungsfreie Stromversorgungen (USVs) Eaton Powerware BladeUPS