Eaton 9395 Plus 1 Betriebsanleitung PDF herunterladen (Seite 172)

COMMUNICATION

EATON Powerware

9395 UPS (450–550 kVA) Installation and Operation Manual S 164201701 Rev 2 www.powerware.com

8−4

Remote Notification differs from the basic Terminal mode with the addition of the

following functions:

S Call Answer

The Call Answer function allows the user to call into the UPS from a remote

location and enter Terminal mode.

S Call Out

The Call Out function allows the UPS to be configured to call either a remote

computer or numeric paging service over the phone line. Call Out allows the UPS

to call a remote computer and leave a one-line descriptive message of the alarm or

notice condition. Numeric paging support allows the UPS to call a paging service

and send numeric messages.

S Housekeeping

The Housekeeping function maintains the link between the UPS and modem.

8.5 Terminal Mode

In Terminal mode, the user can request the following:

NOTE The brackets ([ ]) in the following bullets indicate standard keyboard characters. To use a key

combination, hold down the Escape key and press the indicated letter key.

S [ESC] [A] displays the Active Alarms.

S [ESC] [H] displays the Event History.

S [ESC] [N] displays the Node Bits Setup.

S [ESC] [Q] Quit.

8.5.1 Display UPS Control Panel

When this function is invoked, a facsimile of the UPS control panel is displayed on the

terminal screen. All controls are functional and can control the UPS remotely. The only

exception is the Load Off control which requires the operator to press and hold the

local control for two seconds to shut down the UPS.

To remotely control the UPS or view UPS information, use the Escape key legend to

control the function normally controlled by the control panel softkeys. See

paragraph 7.2 on page 7−2, Using the Control Panel," for instructions on navigating

the control panel.

1 2 ... 167 168 169 170 171 172 173 174 175 176 177 ... 189 190

Keine Kommentare

Eaton 9395 Plus 1 Betriebsanleitung Seite 172