Eaton DeviceNet Starter Network Adapter D77B-DSNAP Wartungshandbuch PDF herunterladen (Seite 16)

April 2008

16-16

For more information visit: www.eaton.com PG03300001E

Accessories & Modiﬁcation Codes

Accessories

Advantage NEMA

Eaton’s Cutler-Hammer

Advantage

Control

Modules (ACMs)

provide a

cost-effective alternative to push-

buttons, selector switches, indicating

lights, reset mechanisms, bell alarms

and panel meters when used with the

Advantage product line. Typical input/

output control functions provided by

panel mounted devices are conveniently

packaged in a series of modules

depending on application and

complexity.

Sixteen styles cover applications

ranging from:

■ Full voltage non-reversing

■ Full voltage reversing

■ Full voltage multispeed

■ Reduced voltage

■ DeviceNet compatible

Modules exist for each application to

provide the functions of:

■ Status only

❑ Indicating lights

❑ Reset

■ Status, START/STOP and RESET

■ Status, HOA and RESET

■ Status, START/STOP/HOA and

RESET

Full Voltage Pushbutton

Control Module

Metering Module

An additional Metering Module

replaces conventional ammeters

(three-phase), replaces reset mecha-

nisms and displays trip cause and

data, control voltage and status.

This Metering Module can be used

independently or in conjunction with

any of the ACMs. An extra plug con-

nection is available on the rear of each

ACM to accept the Metering Module

input.

The ACM family has been designed to

save:

■ Panel space (versus conventional

pushbuttons, selector switches and

indicating lights)

■ Mounting and assembly labor

■ Wiring and installation time

Regardless of the conﬁguration, instal-

lation requires mounting only one 2.25

x 3.5 inch module, substantially reduc-

ing space requirements. Fitting a stan-

dard Greenlee punch and die set,

Greenlee #60071, installation is

accomplished with only two screws.

ACMs provide savings in wiring costs

as well. Regardless of the complexity

of the application, wiring is reduced to

a single plug-in cable, see photo at left.

Communication is not restricted by

use of the Advantage Control Mod-

ules. An extra plug connection is

available on the rear of the ACM or

Metering Module to allow a

WPONIDNA or WPONI Communica-

tions module to be plugged in.

Full Voltage and Reduced Voltage

Control Modules

Status Only

■ 4 LEDs indicate that the motor is

OFF, Running, Tripped or in Alarm

mode (motor current is above the

trip current setting)

■ Includes RESET button

START/STOP

■ Motor START/STOP controlled by

START and STOP buttons

■ Includes all features of Status Only

module

HOA Selector Switch with

START/STOP

■ In HAND mode, motor will start and

stop in response to START/STOP

pushbuttons

■ In AUTO mode, motor will run in

response to remote signal

■ Includes all features of Status Only

module

ON/OFF/AUTO Selector Switch

■ Motor will run in ON mode and not

in the OFF mode

■ In AUTO mode the motor will run in

response to a remote signal

■ Includes all features of Status Only

module

Reduced Voltage Control Modules

The four reduced voltage pushbutton

control modules provide control using

two to four starters and/or contactors.

The faceplates are identical to the full

voltage modules, and the pushbuttons

all perform the same functions. The

module is programmed for the type of

reduced voltage starter which sets the

sequence of contact open and closing.

Figure 16-11. Full Voltage and Reduced Voltage Control Modules

OL Alarm

Trip

OL Trip

OL Alarm

Trip

OL Trip

OL Alarm

Trip

OL Trip

RES

Reset

Run

Off

OL Alarm

Trip

OL Trip

RES

Reset

RES

Reset

RES

Reset

Run

Off

Run

HAND

START

STOP

START

STOP

OFF

AUTO

OFF

AUTO

Off

Run

Off

Status Only

START/STOP

Control

HAND/OFF/AUTO Control

with START/STOP Pushbutton

Control in HAND Mode

ON/OFF/AUTO

Control

3.5

(88.9)

2.25 (57.2)

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 46 47

Kommentare zu diesen Handbüchern

Keine Kommentare

Eaton DeviceNet Starter Network Adapter D77B-DSNAP Wartungshandbuch Seite 16

Kommentare zu diesen Handbüchern